How to set up the SingStar , Eyetoy and the Steeing Wheel for a Sony Playstaion 2

Hi there and welcome to this tutorial here you will learn how to setup PS2 singstar and Sony’s eye toy for Ps2 and finally how to setup a steering wheel.

Section1 .Singstar

Section 2 .Steering Wheel

Section 3 .Eyetoy

Now to start with the Singstar. Read on for the Steering Wheel and the eyetoy.

Singstar is fairly simple to setup. First you will need a Sony PS2 fully set up and working. Next you will need Singstar game CD and the singstar microphones. Firstly you will see an adapter with a USB at one end. Plug the USB into the front of the console and plug both microphones in to the adapter. Now plug the controller in player1 is all that’s needed.

Now start up your Sony PS2 and put in a controller and the disc as normal. Allow the game to load and go through the pre installed synchronisation process to allow the microphones to work at their best. Once completed you will finally be able to play the Singstar game.

Thank You for reading the rest of the tutorial is Eyetoy and a PS2 steering wheel.

Now the Steering Wheel this setup is rather simple. First you will need a fully work PS2 with a game that is a racing for the best performance I suggest Gran turismo as it is compatible with s steering wheel.

The steering wheel is an excellent accessory and for maximum performance you will need to have an open space and a clean table or area to place the steering wheel for the most fun and usage.

Now once you have an open space and a place to sit the steering wheel we move on to connecting it to the PS2 as you can see the connector at the end of the steering wheel wire is the same as on the controllers. So simply turn on the PS2 and put in your disc then now put the steering wheel into the front socket so where you would put player 1 in. Now load the game with the steering wheel perform any setups and your finished.

EYETOY

Now the Eyetoy. Firstly you shall require a Sony Playstaion 2 and a Eyetoy and the Eyetoy game.

Now the main way to setup the eyetoy is find an open spot on top of the tv or below a position where the camera can see you and the entire room. Warning be carefull in placement if you are under a light this can be dangerous as you can hit the light and this is a common problem as the eyetoy requires some light your best bet is to put the eyetoy with you away form the light or even buy a light shade or cover something to protect you if you knock it or it falls. Now as you can see on the front of the PS2 is a USB port plug the usb on the Eyetoy camera into the PS2 usb hub at the front Power on the console and run the game now start by going through the preinstalled settings and you ready to begin gaming.